Midi In with an Mbox 2

jake8008 · Post by **jake8008** » 14 Jan 2010, 14:20

I've got sounds coming through the mbox, but earmaster isn't recognizing them.

The midi input in earmaster is on and i've selected mbox 2 port 1 from the drop down option for Midi in.

What's the problem?

Post by **Quentin** » 15 Jan 2010, 05:27

Hi,
Is the green circle of the MIDI icon (at the bottom of the EarMaster window) getting brighter when you hit a tone?

jake8008 · Post by **jake8008** » 15 Jan 2010, 13:12

No it doesn't

Post by **Quentin** » 18 Jan 2010, 05:15

Make sure the MIDI input in EarMaster is activated (under the "Answer Input" menu).
Is your MIDI input working in other programs?

jake8008 · Post by **jake8008** » 18 Jan 2010, 09:59

I've already mentioned that the midi input is on. Please read my entire message

jake8008 · Post by **jake8008** » 18 Jan 2010, 10:09

My mbox is working in other programs.

i don't use midi with anything else

Post by **Quentin** » 19 Jan 2010, 02:21

Are you using EarMaster on Mac OS or Windows? (and which version?)

jake8008 · Post by **jake8008** » 19 Jan 2010, 10:17

Mac 10.5.8

Post by **Quentin** » 20 Jan 2010, 08:47

Thanks. Have you checked the Audio/MIDI setup (in OS X) and/or in the M-Box's control panel and made sure that the MIDI is routed and activated as it should.

Sorry for these very general questions, but EM's MIDI has been tested and re-tested with all kinds of set ups without any problem, so before our developer looks into the MIDI code, we have to make sure that it's not just a question of set up, driver or similar.