Couple of things I've noticed.
On the Rhythm Error Detection, there is no audible rhythm to hear, at the top it says, 'Find the notes that do not match with the rhythm you just heard'. Though I can't hear a rhythm at all.
With the interval singing, I can see a signal at the top right when I 'sing' into the mic but I cant hear what I'm singing. Also it says 'Sing or play the major 3rd up from Do' thing is I can't hear Do? When I click 'Play or your answer' or 'evaluate answer' I can't hear anything there too.
Thanks
I checked out the Prefs ? Midi Devices but to no avail.
EM6 problems?
Moderator: Quentin
Hi,
In the preferences, under MIDI DEVICES-->MIDI OUT, the FLUIDR3 GM EARMASTER should be selected as MIDI Out device. To test it, click on the Play button next to the drop-down list. If no sound is played, please try to adjust the volume.
Check also the volume in the AUDIO tab of the preferences.
Finally, under the MIDI INSTRUMENTS tab, test each instrument with the Play button to make sure they produce sounds.
In the preferences, under MIDI DEVICES-->MIDI OUT, the FLUIDR3 GM EARMASTER should be selected as MIDI Out device. To test it, click on the Play button next to the drop-down list. If no sound is played, please try to adjust the volume.
Check also the volume in the AUDIO tab of the preferences.
Finally, under the MIDI INSTRUMENTS tab, test each instrument with the Play button to make sure they produce sounds.
- Because in Music, We're All Ears... -
Hello Quentin,
FLUIDR3 GM EARMASTER was already selected as the MIDI out device and plays fine. The volume is loud enough.
Though when I do Rhythm Error Detection, I still can't hear any rhythm being played being played from Earmaster.
With the interval signing, I can't hear a thing, whether this be from singing in to the microphone (there is a signal) or playing notes on the keyboard at the bottom.
Many Thanks
Earmaster and the Apogee software tell me this, but I can
Quentin wrote:Hi,
In the preferences, under MIDI DEVICES-->MIDI OUT, the FLUIDR3 GM EARMASTER should be selected as MIDI Out device. To test it, click on the Play button next to the drop-down list. If no sound is played, please try to adjust the volume.
FLUIDR3 GM EARMASTER was already selected as the MIDI out device and plays fine. The volume is loud enough.
The volume under audio output is ok as well.Quentin wrote: Check also the volume in the AUDIO tab of the preferences.
All the instruments are can be heard, the one at the bottom Rhythms, however is not audible and has a 0 already selected. I have gone though different numbers and still can't hear anything from this. I then selected 'use .wav file', if I press the Play button and can hear a clap sound.Quentin wrote: Finally, under the MIDI INSTRUMENTS tab, test each instrument with the Play button to make sure they produce sounds.
Though when I do Rhythm Error Detection, I still can't hear any rhythm being played being played from Earmaster.
With the interval signing, I can't hear a thing, whether this be from singing in to the microphone (there is a signal) or playing notes on the keyboard at the bottom.
Many Thanks
Earmaster and the Apogee software tell me this, but I can