Midikeyboard

[gutschein]

Hi together,


I want to make the rhythm exercises using my e-piano (midi).
1) USB MIDI driver is angwählt
2) Button is pressed Midi
3) note for note input activated
4.1) I go to remote, to select channel 1
4.2) I pick note C-2.
5) I dürcke on the piano C-2
Result:
So far this only 2 times.
What am I doing wrong?
I inistalliert the latest update.


System: Windows 7 32Bit Laptop IBM
Piano: Roland fp-1 and Yamaha PSR-225

Many thanks

[gutschein]

Together, Hi,

when the Middriver from the keyboard is detected, also works to control the program.

Problem:
The USB driver is indeed always displayed in the settings,
However, the signals of the keyboard are not transmitted.
The MIDI button is not green, wehen i press a Pianokey.

What can I do?
Would be very grateful for help

Many thanks

[Hans]

Please use the "Check for update" function to get the latest update of EarMaster.

To enable MIDI-in to insert tones or receive claps you need to press the MIDI-in button in the toolbar.
To activate the MIDI remote control you need to enable it in the Preferences.

Best regards,
Hans Jakobsen
EarMaster

[gutschein]

Hi Hans,


I've done everything.
Unfortunately, without lasting success.

After I downloaded the update everything works.
Then I closed the program and reopened.
Then my keyboard was no longer detected.

Would be very grateful for help.
Many Thanks

[gutschein]

Have a tip about what I could not do myself.

[Utku]

You should note that the note C-2 wouldn't exist on most keyboards. This is the C in MIDI octave -2, in other words it's 5 octaves below Middle C. Can you try setting it to a higher note, for example, C1 or C2? In this case, C2 would be one octave below Middle C.